Haltech

Haltech Elite 750 + Mazda Miata MX-5 NB Plug n Play Adaptor Harness Kit HT-150621

Name: Haltech Elite 750 + Mazda Miata MX-5 NB Plug n Play Adaptor Harness Kit HT-150621
Brand: Haltech
SKU: HT-150621
Price: 2314.0 AUD
Availability: InStock

SKU: HT-150621 Barcode: 9356450011860

No reviews

$2,314.00

Product variants

Download Haltechs Quick Start Guide Here

Suits: Mazda Miata (MX-5) NB 1.8L Non VCT (00-04 Aus, 01-05 USA) 1.8L Factory Turbo SE (Aus), Mazdaspeed (04-05 USA) with 3-plug, 3-row factory ECU. Manual transmission only.

Includes: Elite 750 ECU, Plug'n'Play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin TYCO plug and pins, waterproof USB cap, USB programming cable, and software CD.

Harness Overview: If you are using a factory harness and are after an easy ECU upgrade, this is the product for you. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side that plug straight into the factory harness.

Plug'n'Play Installation: A simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
Quick Start Guide: The guide will walk you through the installation of the Haltech Plug'n'Play adaptor into your vehicle.

Harness Features: When installed in conjunction with a Haltech Elite ECU, this harness opens the door to virtually limitless performance modification and tuning of your vehicle.

Fully Programmable Systems: Allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.

ECU Overview: The Elite 750 is an entry-level ECU offering many features available on the more advanced Elite 1500/2500 at an affordable price. Featuring a robust, environmentally sealed, waterproof case, 6 fuel and 6 ignition channels, on-board data logging, and flex-fuel tuning, the Elite 750 is a powerful, compact ECU. Like all Elite Series ECUs, the Elite 750 ECU now uses the Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide.

Supports: 1 to 8 Cylinder engines, 1 to 3 Rotor engines.
Induction: Suitable for both naturally aspirated and forced induction engines.
Load Sensing: By Throttle Position (TPS), Manifold Pressure (MAP), or Mass Air Flow (MAF).
Ignition Modes: Includes Direct fire multi-coil, Distributor ignition, or Haltech CDI systems.
Connections: Compatible with a wide range of display dashes and expansion devices via CAN.
Waterproof Case: IP67 rated with USB cover fitted.
Channels: Up to 45 channels of Input & Output (I/O) expansion via CAN.
USB Communication: Allows easy laptop connection for tuning.
On-board Data Logging: Ensures comprehensive tuning and diagnostic capabilities.

ECU Functions:

Injector Control: Low Impedance with Programmable Injector Peak and Hold.
Flex Fuel Function: Tune boost, fuel, and ignition by ethanol content.
Fuel Flexibility: Suitable for Petrol (Gasoline), Methanol, and Ethanol.
Closed Loop O2 Control: Precise tuning with optional CAN O2 Wideband Controller Kit.
Idle Speed Control: Learning for consistent idle stability.
Data Logging: On-board and laptop data logging.
CAN Bus Communication: For Haltech dashes and expansion devices or OBDII.
Injection Stages: Two stages for Rotary Engines.
Variable Cam Control: Supports engines with a single cam sensor only.

Advanced Tuning:

Resolution: Tuning table resolution up to 32 x 32.
Flexibility: Combine 3D tuning tables with per cylinder compensations and multiple corrections.
Per Cylinder Tuning: 3D correction.
Wideband O2: Connect up to 2 channels via CAN expansion devices.
EGT: Connect up to 12 channels via external CAN expansion devices.
Nitrous Control: Advanced programming of wet or dry nitrous kits with on/off delays.
Boost Control: Intelligent 3D Open loop with flexible user-definable axis and corrections modes.

The Haltech Elite 750 + Mazda Miata MX-5 NB Plug'n'Play Adaptor Harness Kit HT-150621 is a versatile and powerful solution for those looking to upgrade their engine management system, providing advanced features and easy installation for a wide range of applications.

WARRANTY DISCLAIMER

GameOn Motorsports warranties are void when the product in question has been physically altered, improperly installed, used or otherwise damaged due to no fault of GameOn Motorsports or has not been used for the said purpose it was intended or for which it was designed. GameOn Motorsports does not warrant the performance of the products due to lack of control during product installation and usage.
GameOn Motorsports shall not, under any circumstances, be liable for any special, incidental or consequential damages, including, but not limited to, damages or loss of other property or equipment, loss of profits or revenue, cost of purchased or replacement goods, or claims of customers of the purchaser which may arise and/or result from the sale, installation or use of these parts.

Returns Policy
Please choose your products carefully, as GameOn Motorsports will not refund processed and dispatched orders unless they are compromised in some way or unless otherwise stated.

Returns are only available for dispatched orders that contain supplied goods that are wholly or partly defective in appearance, incorrectly packaged or sent in error by fault of GameOn Motorsports, or the goods fail to operate in accordance to their specification or duration period.
Should the need arise to return a product or products please advise us by phone 0434 162 858 or email us at sales@gameonmotorsports.com.au within 7 days of the date of receipt of your order. GameOn Motorsports will resupply your order promptly or any part thereof freight free in instances upon receipt of the returned goods which are in error by fault of GameOn Motorsports or obviously defective from manufacture.

Exchange of items is offered only when the product is unused, package is not opened and within 7 days of the date of receipt. The credit will not include any shipping and handling charges forming part of the purchase price. Customer must pay the return postage and must ensure that the returned Goods are received by GameOn Motorsports in as-new or as-shipped by GameOn Motorsports condition, exchange will be refused if GameOn Motorsports has not received communication on the product being returned.

Warranty returns which are in question of being faulty in appearance or performance by the customer are subject to our initial inspection and will be forwarded on to our supplier for a full warranty claim. If an immediate substitute part is required, the replacement item plus freight costs will be need to be purchased by the customer again until the warranty claim can be fully processed by our supplier.

In the event of an exchange part return, warranty claim credit or refund we will contact the customer directly either via phone or email for details of reimbursement preferably using secure online bank to bank transfer method.

To assist us with any returns please provide us with the following details: your full name and address, product details, invoice number, date of purchase, and the reason for return. Upon receipt of this information we will contact you with the preferred method of goods return if the item cannot be returned by post.