Haltech

Haltech Elite 1500 ECU + Plug and Pin Set HT-150901

Name: Haltech Elite 1500 ECU + Plug and Pin Set HT-150901
Brand: Haltech
SKU: HT-150901
Price: 2215.0 AUD
Availability: InStock

SKU: HT-150901 Barcode: 9356450012034

No reviews

$2,215.00

Product variants

Download Haltechs QuickStart Guide For this product Here

Outputs:

Up to 4 injector and 4 ignition.

Suits:

Popular late-model performance and racing applications. Recommended for 4-cylinder, DBW or 2 rotor engines, EFI conversions, engines with multiple variable camshafts.

Includes:

Elite 1500 ECU with DBW and Race Functions with plug and pins to suit.
USB programming cable.
USB Software Key.

Notes:

Available with universal wiring, terminated engine harnesses, or model-specific Plug'n'Play adaptor kits.

ECU Overview

The Haltech Elite 1500 ECU offers a robust, environmentally sealed waterproof case, perfect for demanding racing and performance applications. This ECU includes drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, knock control, and much more. Paired with the Elite Software Programmer (ESP), it provides unmatched functionality and user-friendliness in an engine control package.

Supports:

1 to 12 cylinder engines
2 rotor engines
Normally aspirated or forced induction
Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP), or Mass Air Flow (MAF)
Staged, sequential, semi-sequential, batch, or multipoint injection patterns
Distributor ignition systems, multi-coil systems, expand CDI range, or Haltech Multiplex CDI systems
Connect to a wide range of display dashes and expansion devices via CAN

Outputs:

4 x fuel injection outputs
4 x ignition outputs
12 x digital outputs
10 x analogue voltage inputs
4 x synchronized pulsed inputs
3 x dedicated inputs (knock, ignition switch, and onboard MAP Sensor)
2 x dedicated engine position inputs with extensive trigger type support
Up to 45 channels of Input & Output (I/O) expansion (via CAN)
USB laptop communication (Windows)
ESP Calibration Software - intuitive and easy to use

ECU Features

Drive-by-Wire Throttle Control (DBW)
Low Impedance Injector Control: Programmable injector peak and hold currents and peak time.
Flex Fuel Support: Direct sensor input to tune your engine's boost, fuel, and ignition by ethanol content.
Flexible Tuning Setup: For Petrol (Gasoline), Methanol, and Ethanol.
Closed Loop O2 Control: Dual bank control for precise tuning (with optional external CAN O2 Wideband Controller Kit).
Knock Control: Synchronized to engine position with high-speed digital filtering for accurate detection.
Variable Cam Control: Independently control up to 4 camshafts.
Closed Loop Idle Speed Control: Learning for consistent idle stability.
Long Term Learning (Auto Tune): On fuel, ignition, cam, boost, and idle control maps (up to 4D).
On-board Data Logging: Up to 40 channels of logging at sample rates up to 5ms (200Hz) with 2MB of internal memory.
Laptop Data Logging: Data log all available channels directly to your laptop's hard drive for tuning and diagnostics.
Dual CAN Bus Communication: For Haltech dashes and expansion devices. Supports OEM CAN and OBDII. View live engine data and set/clear diagnostic trouble codes.
Injection Stages: 1-4 with individual injector flow rates per injector.
Anti-Lag/Rotational Idle: For closed course racing, rally, circuit, or drift. Build and maintain boost during closed throttle conditions.
Rolling Anti-Lag: Lock to your current or pre-set RPM or road speed.
Launch Control: Control your engine's power delivery, RPM, and boost for consistent performance at the start line.
Traction Control: Control your engine's power output via mappable front vs rear axle or individual wheel speed slip.

Advanced Tuning

Tuning Table Resolution: Up to 32 x 32 x 8.
Limitless Tuning Flexibility: Tune your engine by combining 4D tuning tables with 3D per cylinder compensations and multiple user-definable corrections.
Per Cylinder Tuning Correction: 3D.
Wideband O2 Control: Connect up to 9 channels via CAN expansion devices.
Thermocouples/EGT (Exhaust Gas Temperature): Connect up to 12 channels via external CAN expansion devices.
Advanced Engine Protection: Set multi-level limits for sensors to protect against common causes of failure.

Race Functions

Nitrous Control: Advanced programming of up to 6 stages of wet or dry nitrous kits with on/off delays and banked control options. 3D fuel and ignition corrections for all stages.
Boost Control: Intelligent 4D closed-loop learning with flexible, user-definable axis and 14 fully user-definable corrections.
Sequential Turbo Control
CO2 Boost Control: Wastegate pressure and position, intake air bleed control (charge pipe wastegate) functionality for the hardcore racer.
Flat Shifting: Optimize your shifting precision via a combination of inputs such as a clutch switch or strain gauge.
Shock Travel/Ride Height Inputs: Dynamic tuning and data logging to assist in chassis development and power delivery.
Timer Functions: Use the race timer and 5 additional programmable timers for time-based control of multiple engine parameters, power delivery, and other user-definable functions.
Trans Brake Function: Smooth and consistent control of start line staging (Bump or Creep).

WARRANTY DISCLAIMER

GameOn Motorsports warranties are void when the product in question has been physically altered, improperly installed, used or otherwise damaged due to no fault of GameOn Motorsports or has not been used for the said purpose it was intended or for which it was designed. GameOn Motorsports does not warrant the performance of the products due to lack of control during product installation and usage.
GameOn Motorsports shall not, under any circumstances, be liable for any special, incidental or consequential damages, including, but not limited to, damages or loss of other property or equipment, loss of profits or revenue, cost of purchased or replacement goods, or claims of customers of the purchaser which may arise and/or result from the sale, installation or use of these parts.

Returns Policy
Please choose your products carefully, as GameOn Motorsports will not refund processed and dispatched orders unless they are compromised in some way or unless otherwise stated.

Returns are only available for dispatched orders that contain supplied goods that are wholly or partly defective in appearance, incorrectly packaged or sent in error by fault of GameOn Motorsports, or the goods fail to operate in accordance to their specification or duration period.
Should the need arise to return a product or products please advise us by phone 0434 162 858 or email us at sales@gameonmotorsports.com.au within 7 days of the date of receipt of your order. GameOn Motorsports will resupply your order promptly or any part thereof freight free in instances upon receipt of the returned goods which are in error by fault of GameOn Motorsports or obviously defective from manufacture.

Exchange of items is offered only when the product is unused, package is not opened and within 7 days of the date of receipt. The credit will not include any shipping and handling charges forming part of the purchase price. Customer must pay the return postage and must ensure that the returned Goods are received by GameOn Motorsports in as-new or as-shipped by GameOn Motorsports condition, exchange will be refused if GameOn Motorsports has not received communication on the product being returned.

Warranty returns which are in question of being faulty in appearance or performance by the customer are subject to our initial inspection and will be forwarded on to our supplier for a full warranty claim. If an immediate substitute part is required, the replacement item plus freight costs will be need to be purchased by the customer again until the warranty claim can be fully processed by our supplier.

In the event of an exchange part return, warranty claim credit or refund we will contact the customer directly either via phone or email for details of reimbursement preferably using secure online bank to bank transfer method.

To assist us with any returns please provide us with the following details: your full name and address, product details, invoice number, date of purchase, and the reason for return. Upon receipt of this information we will contact you with the preferred method of goods return if the item cannot be returned by post.